Dairy Industry

With the ever increasing requirement for continuous improvement of parts and components cleaning in the Dairy Industry to eliminate any potential contamination causes, Ultrasonic Cleaning can play a critical role in the area in contaminant removal.

This includes Milk Scale off both exterior surfaces and interior channels that are impossible to clean by hand.

Typical parts being successfully cleaned in the NZ Dairy Industry using the IU7030 and IU 9040 Industrial Console Machines include:

Heat Exchanger Gaskets
Filters
Process Valve Parts
Tools

Ultrasonic Cleaning Machine Trial (2016) - Dairy Industry Application

Machine Type – IU 9040

NOTE: We used Enviro cleaner at approx 15% dilution
Heater set point was 50⁰C and Timer set at 30 min
Machine supplied had a rinse tank which can be filled with an anti rust solution for treating steel parts after cleaning.

Parts Cleaned

Process Valve Parts
Tools (A sanitiser at 5-10% dilution can also be added to cleaning tank to clean and sterilise Tools)
Glue Gun Module
Wrapper End Seal Jaw
Dinoflex Grippers
Jelly Injector Parts
Pump Parts
Ice Cream Tamper plate cleaning
Crumb Coater Fabric Filter

NOTE: Other useful applications include:
Seized Components with rusted threads (will loosen up)
Plastic Intralox belt parts cleaning
Bearing Cleaning prior to re-greasing
ACS and Vortex Vacuum Arms
Stainless Steel Mesh Filters (Refrigeration and Process)
Fabric/Cloth Filters